Passive Fall Protection Safety Products

RailGuard 200™ Safety Guardrail

Non-Penetrating Safety Guardrail System

Meets OSHA Requirements 1910.29(b) and 1926.502(b)

From the leaders in Passive Fall Protection, RailGuard Safety Guardrail systems protect employees or any contractor/ serviceman who may not be familiar with your Safety Policy requirements. With a passive guardrail system installed, you will have peace of mind that fall protection safety is always in place.

For more than 30 years, RailGuard 200™ has been protecting workers at-height. RailGuard exceeds OSHA requirements for temporary and permanent guardrail applications for fall protection security.

Non-Penetrating: Maintain rooftop integrity with the weighted base design. Simply place the guardrail base in the desired location, drop in the rail section and pin it. No tools or drilling required.

Customizable: RailGuard 200™ rails are available in a wide variety of lengths in standardized and custom colors or galvanized finish. Adjustable rails are the perfect way to end every run because its length can be adjusted on-site for a perfect fit. Choose finishing rails for terminating a run at a wall or other vertical obstruction. Bump out rails will extend slightly over a parapet wall allowing full access to the roof surface for working. Invisi-Rail allows the rail to be folded down and makes it invisible from ground level. We also offer a wide variety of RailGuard 200 accessories to satisfy unique applications.

Available in seven different colors.*

Almond RAL1013
Black RAL9017
White RAL9003
Gray RAL7045
Blue RAL5017
Statuary Bronze Axalta Coating Systems Inc. PFJ407A5
Safety Yellow RAL1018

*Due to monitor differences, actual colors may vary slightly from what appears online, these color representations can be used as a guideline only. Visit  for specification.

Adjustable Toe Boards
Toe-boards should be used for applications with no parapet where debris can be kicked
and fall. Telescoping steel 2×4 fits base. Four lengths available.

Railguard 200™ Adjustable Safety Rails
Made to adjust for the last section of safety guardrail to give your system a perfect finish.
Available in 4 different sizes.

Centurion Cart™
Keep RailGuard 200™ components organized and ready. Carries up to eight base plates
and seven rail sections. Integrated winch lifts the base plates. Large flotation tires roll
easily, lifting ring for hoisting.

Base Transporter
Base Transport is an invaluable piece when frequent repositioning of bases is required.
Heavy bases can be moved easily with this simple carrier.

Goliath™ Base Storage
Included with Goliath™ cart are 3 base plate storage racks. Each rack holds 8 base plates.
Integrated fork pockets for transport.

Goliath Winch
Add the Optional Goliath™ winch to ease lifting and positioning of base plates.

Goliath™ Mega Cart
Store, transport and deploy your RailGuard 200™ railing system with Goliath™ Mega Cart.
Carries 190-feet of railing sections along with a 5’ swing gate, base transporter, and steel toeboards.


Base Plate

Mounts up to four rail sections

Allows 90° or 45° turns

Narrow 3-1/4” space between rails 90 lbs.

Weight: 90 lbs.


Rail Sections

Top Rail Height = 42” tall

Mid-Rail Height = 20” tall

Three standard lengths: 10’, 8’, 5’

Custom sizes and colors available

Standard rail section 16 ga. welded steel.


Usage Recommendations

  1. End all configurations with either a closed loop that connects all bases and rail sections or the use of a 5-foot Outrigger System to provide the needed counterbalance.
  2. Configurations with Outrigger Systems require one additional base.
  3. Locking pins must be used to secure all rails into the bases.
  4. Use toeboards when there is a danger of materials falling.

Talk to a Safety Representative Today

Contact Us