Passive Fall Protection Safety Products

Double wide bays in a major distribution center.
Double wide bays in a major distribution center.
Square top gate for narrow roller track spacing.
Self-closing gate with dual springs.
Innovative patent pending design.
Gates lay flat between the roller tracks.
Double wide bay, each lane protected separately.
Double wide bays in a major distribution center.

PalletFlow Pro™

Self-closing gate for elevated double wide pallet flow lanes

Meets OSHA Requirements 1910.29(b) and 1926.502(b) and ANSI 6.4.3

OSHA Compliant
Like all Garlock Safety products, the PalletFlow Pro is third-party tested and certified to meet and exceed OSHA standards. Instills peace of mind that workers in elevated pallet flow lanes are thoroughly protected by an independently tested and verified OSHA-compliant gate.

Maximum Productivity
The PalletFlow Pro will not slow product movement in even the highest velocity pallet flow lanes found in retail and other types of distribution centers. The self-closing gate requires no human intervention, so the charge side of the lane is always available to accept a pallet. The system protects each side of the bay independently so even if a lane becomes unusable, only one lane is affected and the adjacent lane functions as normal.

Best Value
The PalletFlow Pro is designed for low acquisition cost, and quick installation and delivers the lowest total cost of ownership. The gate comes preassembled with the axle, pivot pints, and springs which speed installation. It was designed from the ground up to avoid being damaged and eliminate high replacement part costs and repair labor.

View Other Products For:

Request a Quote Download Literature
  • Meets and exceeds OSHA Requirements 1910.29(b) and 1926.502(b) and ANSI 6.4.3
  • Ensures best-in-class safety for employees
  • Automatic self-closing design requires no human involvement.
  • Keeps lanes working at maximum efficiency
  • Independent lane protection in a double-wide bay so if a lane has a problem the adjacent lane is not affected.
  • Gate ships assembled except for the mounting plate for fast installation
  • Fold-away design reduces damage and avoids replacement costs and lane downtime
  • Steel plate or structural integrity and avoids pallets being caught
  • No reduction in lane loading speed or productivity
  • Mounts are independent of the rack framework to avoid stressing the rack’s beams or uprights
  • Hi-visibility safety yellow powder coating assists in lining up pallets for each lane


Specifications

Standards Meets OSHA requirements 1910.29(b) and 1926.502(b) and ANSI 6.4.3
Bay width A wide variety of bay widths, roller track spacing dependent
Attachment Sandwich clamping above and below to the grating, maintains rack beam and upright structural integrity under load
Material Steel, 1.625” tubing, 18 gauge steel skid plate
Finish Powder coated, safety yellow gate and black mounting plate.
Height 1.25” schedule 40 hot dipped galvanized pipe
Weight, center gate 18 lbs.
Weight, outside gates 21 lbs.
Width, center gate Base plate is 15.375”, gate is 10.3” inches
Width, outer gates Base plate is 10.5”, gate is 8.25”
Gate spacing Dependent on roller spacing, gaps must remain less than 19” when installed
Reliability OSHA tested and passed after 10,000 cycles (750 cycles a year, 10+ years)

Due to continuous improvement, specifications are subject to change without notice.

Part No Description
423-301-001 PalletFlow Pro round top gate, single gate, safety yellow
423-302-001 PalletFlow Pro square top gate, single gate, safety yellow

Quantities needed of each depends on rack width and roller spacing
* Please call for other sizes

Related Products

Talk to a Safety Representative Today

Contact Us