Passive Fall Protection Safety Products

Freestanding Swing Gates

Manual Swing Gate Using RailGuard 200 Bases

Available in safety yellow and in widths from 4’ to 12’ in one-foot increments, the freestanding swing gate is designed to provide access through a section of Guardrail 200 railing.

On a rooftop, it can be used to provide an opening in the guardrail system where materials can be lifted and placed on the roof. Because it is not a two-gate system, appropriate safety measures must be used such as being tied off to an anchor point when the gate is open and the fall edge is exposed.

It can also be used where it is not possible or desirable to permanently mount a gate with anchors. Take a dock door as an example. Rather than drilling into the concrete and installing anchors, non-penetrating weighted bases are used to support the hinge post and latch post.

View Other Products For:

  • OSHA compliant gate for RailGuard 200 installations
  • Non-penetrating design with no drilling or anchors required
  • Provides clear openings from 4’ to 12’ in one-foot increments
  • Gate can open to the left or right for application flexibility
  • The kit consists of a rail, easy-rolling wheel, latch post, hinge post, and latch. Bases sold separately


Clear opening widths 4’ to 12’ in one foot increments
Top rail height 42”
Mid rail height 20”
Wheel 10” rubber, solid flat free
Material Steel
Finish Powder coated safety yellow
Latch Zinc plated steel

Due to continuous improvement, specifications are subject to change without notice.

Part No Description
300621 4.0’ gate, NO BASE, safety yellow
300622 5.0’ gate, NO BASE, safety yellow
300863 9.0’ gate, NO BASE, safety yellow
300623 10.0’ gate, NO BASE, safety yellow
300882 11.0’ gate, NO BASE, safety yellow
300881 12.0’ gate, NO BASE, safety yellow

* Please call for other sizes

Talk to a Safety Representative Today

Contact Us