Passive Fall Protection Safety Products

RailGuard 200™ Safety Guardrail

Non-Penetrating Preformed Safety Guardrail System

Meets OSHA Requirements 1910.29(b) and 1926.502(b)

For more than 35 years, RailGuard 200 rails and bases have been protecting the leading edge on rooftops. Its weighted, non-penetrating design makes it the perfect solution for permanent mounting and for temporary protection during roofing work or general construction.

It’s 4-post design makes it easy to choose which port to use to get the best fit and spacing on the roof. Built-in two lifting handles make it easy to move around the roof.

A wide range of options and accessories are available to accommodate any unique situation that may exist on your rooftop.

  • Safety assured, OSHA compliant with thirty party verification upon request
  • Non-penetrating design maintains the roofs watertight integrity and its warranty
  • Available in a wide range of colors
  • Integrated toeboard adapters for 2” X 4” lumber for construction professionals
  • Adjustable rails available
  • Only two 5’ outriggers required for non-closed loop systems saves money
  • Compatible with surface mount, permanent mount bases
  • Four post designs for perfect spacing or creating unique designs for complicated roofs
  • Available with adhesive pads or rubber slip sheet mat to protect delicate roofs
  • High wind load rating with solutions for class II and class II wind locations guaranteeing safety
  • Double lifting handles make it easy for one or two people to carry
  • A wide variety of options and accessories including bump-out rails, rail fold-down adapters, wall connectors, base transporter, finish rails for wall terminations, etc.

Garlock Safety Systems Safety Rail Rail ReSizer
Garlock Safety Systems Safety Rail Rail ReSizer

Rail ReSizer™
 
Resizes any standard RailGuard 200 preformed rail to a shorter length with 4 quick cuts.
No measuring required to make the rail the perfect length to fit the application.
Infinitely adjustable, a standard 10’ rail can be resized from 9.5’ all the way down
to less than 2’ and it’s the perfect solution to have handy on a job site where the
overall dimensions can and do vary. Sold as a kit of two splices so one kit is
needed per rail. Available in safety yellow of galvanized finish.

Watch Garlock Safety Systems Rail Resizer installation instructions



Invisi-Rail™
 
With our simple bolt-on adapter, Invisi-Rail folds down to only 8” above the roof.
No one from the ground will ever know you have guarding in place. When technicians
need to service the equipment they simply fold to the upright position. Invisi-Rail
goes one step beyond the secure protection of the RailGuard 200™ system by offering
a bolt-on adaptor that allows the railings to be folded down and out of sight when
not in use. Still completely free-standing, easy to set up and OSHA compliant,
Invisi-Rail is the best all-around fall safety protection.



Adjustable Toe Boards
Toe-boards should be used for applications with no parapet where debris can be kicked
and fall. Telescoping steel 2×4 fits base. Four lengths available.



Railguard 200™ Adjustable Safety Rails
Made to adjust for the last section of safety guardrail to give your system a perfect finish.
Available in 4 different sizes.



Centurion Cart™
Keep RailGuard 200™ components organized and ready. Carries up to eight base plates
and seven rail sections. Integrated winch lifts the base plates. Large flotation tires roll
easily, lifting ring for hoisting.



Base Transporter
Base Transport is an invaluable piece when frequent repositioning of bases is required.
Heavy bases can be moved easily with this simple carrier.



Goliath™ Base Storage
Included with Goliath™ cart are 3 base plate storage racks. Each rack holds 8 base plates.
Integrated fork pockets for transport.




Goliath Winch
Add the Optional Goliath™ winch to ease lifting and positioning of base plates.




Goliath™ Mega Cart
Store, transport and deploy your RailGuard 200™ railing system with Goliath™ Mega Cart.
Carries 190-feet of railing sections along with a 5’ swing gate, base transporter, and steel toeboards.




Base mat
24 x 24″ heavy-duty base mat, non-adhesive, Black




Non-skid pad
24 x 24″ heavy-duty base mat, non-adhesive, Black

Specifications: Base

Weight 90 lbs.
Material Cast iron
Finish Powder coat paint or hot dip galvanized
H X W X D 6.3” X 21.5” X 21.5”
Rail ports Four
Rail mounting options Eight: north, south, east, west and 45 degrees between each
Toeboard ports Four
Auxiliary mounting bolt holes two
Lifting handles two
Standing seam roof compatible Yes with adapter plate

Specifications: Rail

Material 16 gauge Steel
Top rail height 42”
Midrail height 20”
Outer diameter 1.62”

Due to continuous improvement, specifications are subject to change without notice.

Part No Description
411-002-000 Set and PreventTM Base, OSHA compliant – lowest cost – best value
156324 Set and PreventTMcustom fit rubber pad, integrated water drainage, black
155160 Base, without pads, safety yellow
407723 Base, with adhesive pads, safety yellow
155159 Base, without pads, galvanized
407724 Base, with adhesive pads, galvanized
155278 Clevis pin, with locking bail, for current 4-post base, zinc plated
Rails
402335S 10.0 ft. Rail – safety yellow
404977S 8.0 ft. Rail – safety yellow
402337S 5.0 ft. Rail – safety yellow
404654G 10.0 ft. Rail – galvanized
406930G 8.0 ft. Rail – galvanized
404656G 5.0 ft. Rail – galvanized
Rail ReSizerTM
402-001-600 Kit of two, one needed per rail, galvanized
402-001-001 Kit of two, one needed per rail, safety yellow

*Please call for more sizes and colors
* Please call for adjustable guardrails and toeboards

Talk to a Safety Representative Today

Contact Us